喉部长度和扩张角对离心压气机管式扩压器影响研究

针对带楔形扩压器的高负荷离心压气机,利用数值模拟手段对其进行了研究,计算获得的离心压气机特性与试验结果符合较好。在此基础上,设计了具有不同喉部长度和扩张角的管式扩压器,利用经过校核的数值模拟手段对管式扩压器的喉部长度和扩张角进行了参数化研究。研究发现较长的喉部会使压气机设计点的性能下降,但是却可以抑制近失速点扩压器内的流动分离,喉部长度与喉部直径之比为0.5时综合性能较优;较大的扩张角会造成扩压器内流动分离,增加流动损失,扩张角由4°增加到12°时压气机效率降低了约3%。     

一种基于承载效率准则的复合材料机翼结构布局优化方法(英文)

提出一种针对大型复合材料机翼结构的二级布局优化策略。系统级根据结构形变调整设计指标,子系统级优化结构布局以满足系统级约束。将机翼壁板中各种临界失效载荷的接近程度作为评判结构效率的标准,通过将结构效率作为优化目标,保证了所求解问题的连续性。加筋壁板通过等效的正交异性板模拟,并根据能量原理预测总体失稳载荷。讨论了加强筋支持弹性对于蒙皮抵抗局部失稳性能的影响,并通过神经网络代理模型对其进行逼近。采用解析模型对失效特性做出评估,减少了计算资源的占用。最后以一种大型机翼结构的综合优化作为算例,计算结果满足设计要求,验证了该方法的可行性。     

机场终端区着陆次序的排序规划算法

讨论了机场终端区飞机到达流的排序规划问题。为了能够在终端区交通繁忙的情况下高效地为到达的飞机流安排合理的着陆次序，并在不违反飞机间距要求的情况下给出各飞机经过优化的着陆时间，提高机场跑道的利用率，提出了经过改进的先来先服务、带有时间提前量、带有约束的位置偏移三种排序算法。当进入机场终端区的飞机数量超过机场终端区的容量时，分航路对飞机排队并对飞机间的距离进行限制     

确定无约束梁耦合振型的一种途径

无约束梁耦合振动问题属于单柔体动力学问题,确定无约束梁耦合振型对于分析梁的振动性质具有重要意义。首先给出单柔体动力学的拟变分原理,然后分析无约束梁耦合振动的特点,应用单柔体动力学的拟变分原理建立了确定无约束梁耦合振型的一种途径。应用这种途径求解无约束梁耦合振动的奇数次振型和偶数次振型。最后,讨论了有关问题。     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

基于DTC的开关磁阻电机转矩脉动抑制方法研究

开关磁阻电机(SRM)具有诸多性能优势,发展前景广阔,然而严重的转矩脉动极大地限制了其应用范围.对SRM直接转矩控制方法(DTC)进行了研究,对DTC的核心思想进行了介绍,给出了空间电压矢量的选取原则.采用有限元法(FEM)和神经网络(NN)相结合的方法,在Matlab中搭建了一个四相8/6极SRM的动态仿真模型.在不同的工况下,对DTC的控制性能进行了仿真分析,结果表明,DTC的引入可以有效地抑制SRM的转矩脉动,同时保证系统具有良好的调速和带载能力.     

A mission template for exploration and damage mitigation of potential hazard of Near Earth Asteroids

The Apophis Exploratory and Mitigation Platform (AEMP) concept was developed as a prototype mission to explore and potentially deflect the Near Earth Asteroid (NEA) 99942 Apophis. Deflection of the asteroid from the potential 2036 impact will be achieved using a gravity tractor technique, while a permanent deflection, eliminating future threats, will be imparted using a novel albedo manipulation technique. This mission will serve as an archetypal template for future missions to small NEAs and could be adapted to mitigate the threat of collision with other potential Earth-crossing objects.     

梯型螺纹量规在航天产品检测中的应用

介绍了梯形螺纹量规的的工艺性能,从外观、相互作用、螺距半角和中径的测量等方面分析了梯形螺纹量规检测技术,并对其应用规划加以阐述,以提升航天军工产品的工艺技术水平和使用可靠性。     

航空液压壳体类零件数字化高效加工

随着科研项目的增多,原有模式下的生产成本和生产时间不断增加,尤其是交付时间很难保证.航空液压壳体类零件作为液压设备中的关键零件,对产品的总体功能和成本起着至关重要的作用.